Started with a stair tread from Home Depot. Cut off the corners with the scroll saw. Routered the edges with the Roman Ogee bit. Then I printed out the letters and traced them on with transfer paper. Used a Dremel with a very small round bit to cut the letters. Filled with black acrylic paint. Sanded off the excess from the face. Finished with Amber colored Shellac from Bullseye.

  • scott_anon_21@lemmy.ca
    link
    fedilink
    arrow-up
    1
    ·
    19 hours ago

    Very impressive. Never tried. Am now inclined to do a test and see how difficult it is given all the other comments.