tl;dr don’t bother. This is too abstracted and nuanced. That is okay to skip.
I like to understand the abstract scope of engineering. This is way beyond the simple surface level, with pics below to illustrate my point.
With electric guitar pickups, the complexity of field shaping and design control over the sensor seems like a place where optimising the profitable manufacturability of the final product remains the primary constraint with little deviation.
I struggle to qualify and quantify my intuitive hunch that there is a whole lot more potential to engineer something new and better within the realm of modern manufacturing. I don’t know the principal questions I should ask or what might disprove my ideas from the get go.
- Most transformers shape the magnetic field far more than guitar pickups.
- a guitar pickup appears to be more of a two dimensional sensor that picks up the motion of a ferromagnetic string in the two primary directions of motion
- there are more complex harmonic motions present than a pickup can register in two dimensions
- the coil and slugs of a pickup are surrounded by a single large winding, yet the strings each have very different frequencies
- it is now possible to make a powdered ferrite core of nearly any shape and frequency
- the traditional pickup has little effective shaping of the magnetic field path
- guitar pickups are not optimised to a point where they are readily used elsewhere in other sensory applications and devices as economy of scale should dictate in an open and manipulation free market… I don’t think they are anyways
- what might be the result if a 270° toroidal powdered core were designed and shaped for each string while tailoring the copper winding and ferrite for each string’s mean frequency and shielding each of these
- would a chord segment gap in a toroidal core pick up more 3d motion from the string
- what effect would a primary and secondary winding wound in the opposite dot notation direction have on the pickup of more complex harmonics and motion
- why does none of this matter due to the filtering of LCR and the noise floor or other aspects
Like here is the basic range of commercial products:
The typical schematic of operation:
Basic construction:
This is a typically low noise toroidal transformer that has been around for ages:
Now I need you to abstract this concept with me a little bit. Imagine if a small toroidal core was below each string and offset towards the neck or bridge so that they will fit. Nothing would stick out or surround the string. The 270° is not a radius cut like a pie. Instead it is a chord and removed segment:
There are totally random pics from DDG that are somewhat illustrative in abstract:
These are just some random powdered core ferrites that illustrate how these can be formed into any shape now:
I usually avoid anything audiophile related because it draws out pseudo science nonsense like crazy, but at the center of this question is really a desire for a deeper understanding of sensors and magnetics that have much broader applications in precise motion control and sensors for a range of equipment.
In a higher level of abstraction, I’m also really asking when and where does this subject become the realm of the illusive bearded nude virgin demigods that get enslaved to corpo NDA masters from birth. .5/s
I forget if it was Veritasium, Steve Mould or one of the other edutainment content creators that was showing how waves move through a string and form the extra major harmonics along the length. I was half baked thinking of that and how the string is not constrained to a single plane of vibrations.
I am thinking of the motion of the string being more complex, like if I placed a coil under the string and one at 90° to the first beside the string, there should be a subtle difference between the two signals. The motion of the string may be oscillating entirely within the field of each pickup coil, but the motion with respect to the magnetic pole of the pickup will be different. If two fields are pointed at the string from opposing angles, perhaps more of this motion is defined. It might alter the sound for more subtle picking techniques like plucking, slapping, palm muting or others.
Also there is the question of what is the optimal turns ratio and signal for each string. If each string had its own pickup and winding, it is like audio channels on a mixer, it creates versatility and nuance. It’s just an idea.
Not really. It sounds generally like you’re overvaluing the role of a plane relative to the magnetic poles. The string moves somewhat circularly, like a jump rope. It doesn’t matter how you angularly orient the pickups, all else being equal.
As for per-string pickips, hey, I’m all for it. Give me 6 output jacks as well so that each string can get its own effects chain.
Have you ever considered getting into synthesizers? Based on your thoughts I feel like you’d really enjoy making synth patches
I think OP is interested in the role of oscillation planes because with an acoustic guitar, exciting a string parallel (lateral) to the guitar vs perpendicular to the guitar has a perceptible difference in tone.
OP believes that this difference isn’t captured by common electric guitar pickups.
From what I’ve read in this thread common pickups measure the speed of the string, basically considering both planes of vibration the same. But an acoustic guitar responds more to the perpendicular oscillations than the lateral oscillations. (Because the perpendicular plane oscillations tends to work the bridge/soundboard, and push air towards and away from the sound hole).
Although I agree that ultimately the string’s oscillation is pretty much circular/cylindrical/bi-conical, but I suspect there is a significant transient effect that could be explored/exploited with redesigned pickups.
I’m also curious if it would be possible to use a string with a [section of] non-circular cross section to allow the [creation and] detection of torsional vibrations.
So, you are making half-baked ideas, vaguely recalling a YouTube video, and decided to reinvent guitar pickups based on string motion in multiple dimensions? Ok. The reality is that modern pickups already capture harmonics quite well—that’s why guitarists can play harmonics by lightly touching the string and why we can hear the rich overtones in complex chords. Your idea of capturing “more” harmonic detail by adding a second coil at 90 degrees might sound clever in theory, but let’s be real: any actual benefit would likely be drowned out by filtering, noise, and diminishing returns in the real world.
The suggestion of giving each string its own winding and turns ratio is … fine, I guess, but this isn’t mixing a multitrack recording; it’s a guitar pickup designed to balance simplicity, functionality, and tone. Innovation also means accepting when a system is already pretty optimized for its purpose, not adding complexity for the sake of chasing minor nuances that might only appeal to a tiny fraction of people who know what “half-baked” string theory even means.
Nice attitude for a back of napkin lunch idea. This is my idea of trash thought random casual conversation. I’m not presenting you with some investment proposal. I’m in the middle of a far more difficult and complicated project. This was just my peripheral subconscious making a distraction to procrastinate while sipping a morning coffee.
I never claim to be an expert at much of anything. All I claim is a life long curiosity. Feel free to block me it that offends you. I’m physically disabled and this place is one of my only forms of outside human contact.
Well, if we’re talking “trash thought” and “random casual conversation,” maybe you shouldn’t get so defensive when someone takes your idea seriously enough to critique it. You threw out a concept, I responded with valid points, and suddenly it’s all “peripheral subconscious” and coffee-sipping procrastination. Right. Let’s be honest—phrases like that are just filler when you’re backpedaling because you can’t take a bit of thoughtful criticism.
The fact that you framed it as some grand distraction from a “more difficult and complicated project” doesn’t excuse the fact that you were pitching a half-baked idea as if it was worth discussing, and now you’re retreating into “oh, it’s just casual, don’t take it so seriously.” If you didn’t want feedback, you could’ve kept your musings in your “subconscious” instead of posting them publicly.
And throwing in personal circumstances like your disability as a shield doesn’t make your argument stronger or immune from criticism. If you’re here for conversation and contact, great, but you don’t get to play the victim when someone challenges your ideas, especially when it’s what you were asking for.