This is an abrasive disk, rotating at 1500 rpm. When I shine my flashlight at it, it carries the glow with it, approximately halfway around the disk. What am I seeing happen here?

  • Brokkr@lemmy.world
    link
    fedilink
    English
    arrow-up
    148
    ·
    1 year ago

    I’m guessing it’s an aluminum oxide abrasive? The abrasive is flourescing due to the little bit of uv coming out of the LEDs.

    You might find this interesting, if you are grinding iron or steel then the grinding surface may not flouresce due to the iron bonding with the aluminum oxide.

    • Troy@lemmy.ca
      link
      fedilink
      English
      arrow-up
      35
      ·
      1 year ago

      This seems like a perfectly reasonable answer. OP! You could probably test this by changing the type of light you’re using. Try a red laser pointer as a control, and a black light wand (the sort they use to detect counterfiet bills), and see what happens.

      • Wogi@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        39
        ·
        edit-2
        1 year ago

        Sadly I have neither of these things available on hand to test that theory but I can at least confirm that the abrasive wheel is a ceramic alumina.

        Actually NVM, I found a laser pointer and it has no effect, though it is admittedly quite dim.

        • Troy@lemmy.ca
          link
          fedilink
          English
          arrow-up
          87
          ·
          1 year ago

          Complete tangent, but alumina, aka aluminum oxide, is usually considered the second hardest naturally occurring material. When it is found in nature, it is given the mineral name corundum and is clear. But if there are some impurities in it, you can get colours. Red corundum is called Ruby, and blue is called Sapphire. In the beauty industry, the same material (mixed with magnetite) is called emery, and lends its name to emery board, and is used in nail files. In the tech industry, it’s used to make the extremely scratch resistant coating on most modern phone screens (basically nothing but diamond will scratch it).

          You have subscribed to alumina facts. I’m sorry, the cat facts guy was busy.

          • Wogi@lemmy.worldOP
            link
            fedilink
            English
            arrow-up
            42
            ·
            1 year ago

            We also use emery paper to smooth out rough surface finishes on machined parts. None of my tools but some of the tools the other guys have in the shop use little Ruby beads as reference surfaces. Our wire EDM also uses Ruby for some critical parts.

            You’ve been subscribed to machine facts, strap in it’s a bumpy ride

    • 9point6@lemmy.world
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      6
      ·
      edit-2
      1 year ago

      I saw “iron”, “aluminium” and “oxide” and I briefly assumed you were trolling until I looked again to check which one was the oxide.

    • Wogi@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      2 months ago

      It’s a cheap LED pen light, they hand them out like candy where I work. Most of us have our own flashlights anymore.

  • regdog@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    19
    ·
    1 year ago

    What effect are you talking about? Is there a frog clinging to the underside of that stone, and you try to coax him out with a flash light?